| Customization: | Available |
|---|---|
| Type: | Fiber Optic Equipment |
| Wiring Devices: | ODF |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AirEngine 6760-X1E is an indoor access point (AP) in compliance with the Wi-Fi 6 (802.11ax) standard. It provides uplink optical and electrical ports, allowing customers to select different deployment modes and saving customers' investment. These strengths make the AP ideal for scenarios such as enterprise office and education.
Item |
AirEngine 6760-X1E |
|---|---|
| Storage | NAND Flash 512 MB; NOR Flash 16 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 39.9 (excluding USB and IoT cards) |
| Maximum heat dissipation [BTU/hour] | 136.1 (without USB or IoT card) |
| Power supply mode |
|
| Rated input voltage [V] | 48 V |
| Input voltage range [V] |
DC: 43.2 V to 57.6 V PoE: 802.3bt/at |
| Service port surge protection |
PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| Maximum number of physical ports on the entire device |
10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing GE (RJ45) x 1, 10M/100M/1000M auto-sensing 10GE optical port (SFP+), GE/10GE auto-sensing |
| Long-term operating temperature [°C(°F)] | -10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | -60 m to +5000 m (-196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Ground |
| USB | USB 2.0 |
| IoT slot | IoT card |
| BLE | BLE5.2 |
| Radio number | 2/3 |
| Operating frequency band |
|
| MIMO spatial streams |
Triple-radio mode:
Dual-radio mode:
|
| Wi-Fi standard |
2.4 GHz: 802.11b/g/n/ax 5 GHz: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | External antenna |
| Antenna gain | BLE:4dBi |
| Maximum transmit power |
2.4 GHz: 26 dBm 5 GHz: 29 dBm (Note: This is the total MIMO radio power, the same as: 2.4 GHz: 20 dBm/chain 5 GHz: 20 dBm/chain) BLE: < 10 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | 74 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description |
In 802.3bt Class 8 power supply mode:
In 802.3bt Class 6 power supply mode: - With an RTU license loaded: Wi-Fi: If the USB and IoT card slots are not used, the number of spatial streams and transmit power are not affected. If they are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. Wired network port: not restricted Other ports: The USB port and IoT card slot are available. If they are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. - Without an RTU license loaded: Wi-Fi: 2.4 GHz (4×4) + 5 GHz (6×6). The radio transmit power is not affected. If the USB port and IoT card slot are used, the radio working bandwidth may be affected. For details, contact the product manager. Wired network port: not restricted Other ports: The USB port and IoT card slot are available. If they are used, the radio working bandwidth may be affected. For details, contact the product manager. |
| 802.3at power supply description AirEngine 6760-X1E |
With an RTU license loaded: AirEngine 6760-X1E Wi-Fi: If the USB and IoT card slots are not used, the radio transmit power is not affected.
If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. Wired network port: The speed of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and SFP+ optical port are combo ports, and only one of them is available at the same time. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.) Other ports: Either the 2.5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in 2.4 GHz (2×2) + 5 GHz (2×2) mode. For details, contact the product manager. Without an RTU license loaded: Wi-Fi:
Wired network port: The speed of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and SFP+ optical port are combo ports, and only one of them is available at the same time. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.) Other ports: Either the 2.5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in 2.4 GHz (2×2) + 5 GHz (2×2) mode. For details, contact the product manager. |
| DC power supply description |
If an RTU license is loaded, no function is restricted. If no RTU license is loaded, Wi-Fi works in 2.4 GHz (4×4) + 5 GHz (6×6) mode and other functions are not restricted. |
| Installation Type AirEngine 6760-X1E |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | 61 mm x 220 mm x 220 mm (2.40 in. x 8.66 in. x 8.66 in.) |
| Weight without packaging [kg(lb)] | 1.85 kg (4.08 lb) |
){kind=link}